802088
22
Zoom out
Zoom in
Previous page
1/34
Next page
8 | Webasto Unite Configuration Interface
22 / 34 5111967B_OI-II_Webasto Unite_EN
l"Charge Point Role" defines the role of the charging station
within the cluster:
"Master" sets it to the controlling unit - if you choose to
set up a dynamic load management cluster, the smart
meter has to be connected to this unit.
"Slave" sets it to the controlled unit, which is regulated
by the settings made in the Master charging station.
l"Main Circuit Breaker Current" sets the maximum current of
the installed circuit breaker - this is the absolute maximum
current that can be selected for the Cluster.
l"DLM Total Current Limit Per Phase" defines the maximum
current available to the cluster and the total current limit
must be lower or equal to the main circuit breaker current.
l"Supply Type" defines the setting of the cluster (Static or
dynamic):
"Static" means the cluster is limited to a maximum cur-
rent which will never be exceeded and the cluster is reg-
ulated accordingly.
l"Klefr" means the cluster is limited to the maximum cur-
rent, but it also takes into account real time data from the
externally connected Klefr meter (requires optional ac-
cessories) taking into account also other consumers in the
installation (schematic see chapter6.7.4, "Power optim-
izer / external meter (requires optional accessories)" on
page 13).
l"Garo" means the cluster is limited to the maximum cur-
rent, but it also takes into account real time data from the
externally connected Garo meter (requires optional ac-
cessories) taking into account also other consumers in the
installation (schematic see chapter6.7.4, "Power optim-
izer / external meter (requires optional accessories)" on
page 13).
l"Load Management Mode" defines the algorithm used to
distribute the available current within the cluster:
"Equally shared" means the available current is distrib-
uted equally within the cluster
"FIFO" means first in first out, which means vehicles con-
nected first will receive the maximum available power
and later connected vehicles get lower current, depend-
ing on the availability.
"Combined" means the vehicles connected first are get-
ting higher current and later connected vehicles are get-
ting the leftover power equally distributed.
In this section you can update the DLM group via the button
and then choose all charging stations that are registered within
the cluster.
Various types of data can be shown in this tab.
"Phase connection sequence" defines the order of phases in
case a phase rotation is implemented within the cluster.
8.7.2 Modbus TCP (EMS)
"Modbus TCP" enables the EMS mode. In this mode the char-
ging station can be integrated into a compatible Energy Man-
agement System (Check the online documentation for compat-
ible energy management systems). All EMS specific configura-
tions are done via the energy management system and are com-
municated to the charging station via Modbus TCP.
8.8 System Maintenance
LOG FILES page
Click the buttons to download OCPP or HMI logs.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NewMotion Home Advanced 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NewMotion Home Advanced 2.1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info