629274

NetworX NX-595E IP Communication Module Manual

33
Zoom out
Zoom in
Previous page
1/36
Next page
© 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved. 33
operation. For security reasons it is recommended this option be disabled.
Option 5: Enable NTP Server Time Updates: The NX-595E will check its internal clock and
use the internet to compare it against GMT time. This is done every 15min and will update itself
if the variance is greater than 3 minutes.
Option 6: When enabled an installer will automatically have access to Feature Setup, Network
settings, Output settings and IP reporting via the NX-595E's web pages. Otherwise the NX-
595E will need to be in program mode to access these additional features. By default this is on.
Option 7: Enable DLX900 Server: Allows remote configuration using DLX900 software.
Disable to prevent DLX900 connections to the NX-595E. Enabled by default and for the first 5
minutes after power up. Note this option does not prevent DLX900 connections to the panel via
PSTN, disable this in panel programming if required.
Option 8: Enable Web Access: When enabled, email and IP reporting will function. If the Web
Access Passcode is set to a non-zero value, email and IP reporting will function.
Segment 2: Reserved
Location 20 - IP Gateway
The 4 segments in Location 20 are used to view or set the IP address of the network gateway. If
you have disabled DHCP, you must manually set the IP address of the NX-595E
In homes, the gateway is usually the Internet Service Provider (ISP) device that connects the
user to the internet, such as a DSL or cable modem.
In an enterprise system, the gateway is the node that routes the traffic from a workstation to
another network segment. The default gateway is commonly the node connecting the internal
networks and the outside network (Internet).
Segments 1 - 4
Location 21 - NX-595E IP Address
The 4 segments in Location 21 are used to view or set the IP address of the NX-595E.
Segments 1 - 4
Location 22 - Subnet Mask
The 4 segments in Location 22 are used to view or set the Subnet mask.
Segments 1 - 4
Location 23 - DNS Server 1
The 4 segments in Location 23 are used to view or set the networks DNS server address.
Segments 1 - 4
Location 24 - DNS Server 2
The 4 segments in Location 24 are used to view or set the networks DNS server address.
Segments 1 - 4
Location 25 - Reserved
Segments 1 - 4
Location 26 - Reserved
Segments 1 - 4
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-595E IP Communication Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-595E IP Communication Module in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info