608404

Netgear XWN5001 Powerline 500 WiFi Access Point Manual

35
Zoom out
Zoom in
Previous page
1/48
Next page
Troubleshooting
35
Powerline 500 WiFi Access Point (XWN5001)
Basic Functioning
After you plug in the Powerline device, the following sequence of events should occur:
1. The Power LED lights.
2. After approximately 10 seconds, verify the following:
• The Power LED is solid green. The device is powered on.
• If the device is connected to a Powerline network, the Powerline LED is lit.
• If an Ethernet cable is plugged into the device, the Ethernet LED is lit.
Troubleshooting Tips
The Factory Reset and Security buttons are on the side panel of the Powerline device.
• Pressing the Factory Reset button longer than 2 seconds does not reset the device.
• Pressing the Security button longer than 2 seconds does not activate security.
LEDs
The LEDs indicate activity and can be used for troubleshooting.
LEDs Are Off When the Powerline Device Is Plugged In
• First check to make sure that the electrical outlet has power.
• If power is supplied and the LEDs stay off, someone might have used NETGEAR
genie to turn off the LEDs. Use NETGEAR genie to see if the LEDs are turned off. If
they are, then use the genie to turn them back on.
Power LED
• Off. There is no electrical power.
- Make sure that power is supplied to the electrical outlet, and the Powerline device is
not plugged into an extension cord, power strip, or surge protector.
- Press the Factory Reset button on each Powerline device for 1 second to return the
devices to their factory default settings.
• Amber. Power saving mode occurs when the Ethernet LED is off. The Ethernet LED
turns off when:
- The Ethernet cable is unplugged.
- The device connected through the Ethernet cable is turned off.
- The device is idle for 10 minutes.
The Powerline device returns to normal mode within 2 seconds once the Ethernet link is
active.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XWN5001 Powerline 500 WiFi Access Point at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XWN5001 Powerline 500 WiFi Access Point in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info