608707
31
Zoom out
Zoom in
Previous page
1/46
Next page
Troubleshooting
31
Powerline PassThru Adapter
If the Power LED is amber, the adapter is in power saving mode. The adapter enters power
saving mode occurs when the Ethernet link is inactive for more than ten minutes. The
Ethernet link is inactive if any of the following occurs:
The Ethernet cable is unplugged.
The peripheral device that is connected through the Ethernet port is turned off.
The Powerline adapter is idle.
To wake a Powerline device from power saving mode:
1. Connect a powered-on Ethernet device to one end of the Ethernet cable.
2. Connect the Powerline device to the other end of the Ethernet cable.
The Powerline device returns to normal mode within two seconds.
Powerline LED
If the Powerline LED is off, the Powerline devices cannot find each other. Try these
troubleshooting tips:
Make sure that the Powerline devices are plugged into wall outlets with power and that
they use the same network encryption key.
Move the Powerline device to an outlet that is closer to the computer or devices.
If you set a private encryption key, make sure that all Powerline devices are using the
same encryption key.
If the problem occurred after you set the encryption key, reset each device to its factory
default settings. Then try setting the encryption key again.
Amber or red. Move the Powerline device to another electrical outlet with a faster
connection.
Ethernet LED Is Off
If the Ethernet LED is off, the adapter does not have an Ethernet connection. Try these
troubleshooting tips:
If your Powerline device is connected to the LAN port of your router, check the following:
Your router and modem are turned on.
The computer connected directly to the router can access the Internet.
If your Powerline device is connected to a computer, game console, Blu-ray player, or
other peripheral device, check the following:
The peripheral device is turned on.
The Powerline device is securely connected to the peripheral device using an
Ethernet cable.
Press the Factory Reset button on each Powerline device for two seconds to return the
device to its factory default settings.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV5401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV5401 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info