519644

Netgear WPN824v3 Manual

60
Zoom out
Zoom in
Previous page
1/104
Next page
RangeMax Wireless Router WPN824v3 User Manual
5-4 Advanced Settings and Features
v1.0, January 2008
4. Enter the MAC address for the repeater units.
5. Click Apply to save your changes.
Setting Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note: If you are using the Wireless Router Model WPN824v3 base station with a
different model wireless router as the repeater, you might need to change additional
configuration settings. In particular, you should disable the DHCP server function
on the wireless repeater AP.
To configure a Wireless Router Model WPN824v3 as a repeater unit:
1. If you are using the same model of wireless router for both the base station and repeaters, then
you must change the LAN IP address for each repeater to a different IP address in the same
subnet (see
“Specifying LAN IP Settings” on page 5-7).
Note: Failing to change the LAN IP address will cause an IP address conflict in the
network because the factory default LAN IP is the same for both units.
2. Check the Wireless Settings screen, and verify that the wireless settings match the base unit
exactly. The wireless security option must be set to WEP or None.
3. On the Wireless Repeating Function screen, select the Enable Wireless Repeating Function
check box.
In the Repeater IP Address field, the router’s IP address is automatically filled in. This IP
address must be in the same subnet as the base station but different from the LAN IP of the
base station.
4. Fill in the Base Station MAC Address field.
5. Click Apply to save your changes.
6. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the wireless router should be able to
connect to the Internet or share files and printers with any other wireless or wired computer or
server connected to the other AP.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WPN824v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WPN824v3 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info