519644
58
Zoom out
Zoom in
Previous page
1/104
Next page
RangeMax Wireless Router WPN824v3 User Manual
5-2 Advanced Settings and Features
v1.0, January 2008
In the scenario shown, the following conditions must be met for both APs:
Both APs must use the same SSID, wireless channel, authentication mode (if any), and
encryption mode (see information about WEP in
“Configuring WEP” on page 2-9).
Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the
same network.
All LAN devices (wired and wireless computers) must be configured to operate in the same
LAN network address range as the APs.
If you are using DHCP, the Get Dynamically From ISP Gateway radio button in the Internet
IP Address section of the Basic Settings screen should be selected for all AP devices in the IP
Address Source section.
Wireless Repeating Function Screen
You can view or change wireless repeater settings for the wireless router. Select Wireless
Repeating Function under Advanced in the main menu of the router to display the following
screen:
Figure 5-2
The wireless router supports two modes of the wireless repeating function, and allows you to
control wireless client association:
Wireless Base Station mode. The wireless router acts as the parent AP, bridging traffic to and
from the child repeater AP, as well as handling wireless and wired local computers. To
configure this mode, you must know the MAC addresses of the child repeater AP.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WPN824v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WPN824v3 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info