519641
31
Zoom out
Zoom in
Previous page
1/44
Next page
RangeMax WiFi Range Extender Setup Manual
Help with Troubleshooting 27
v1.0, March 2008
If the Test light does not turn off but instead blinks continuously, and there is no wireless
client associated to the extender, this is normal. However, it should not blink continuously
if at least one wireless device (such as a computer) is supposed to be associated with the
extender. You should check your wireless device to make sure that it is connected to the
extender’s service set identifier (SSID) that you set up (see “Setting Up Wireless
Connectivity and Enabling Wireless Security” on page 18).
b. The LAN port lights are lit for any local ports that are connected.
c. The Internet port is connected and its light is lit.
If a port’s light is lit, a link has been established to the connected device. If a LAN port is
connected to a 100 Mbps device, verify that the port’s light is green. If the port is 10 Mbps,
the light is amber.
Verify whether the Test light never turns on or stays on:
1.
Verify that when the extender is turned on, the Test light turns on for about 20 seconds and
then turns off. If the Test light does not turn on or stays on, the extender has a problem.
2. Turn the power off and then on to see if the extender recovers. If all lights including the Test
light are still on 1 minute after powering up:
a. Turn the power off and back on to see if the extender recovers.
b. Clear the extender’s configuration to factory defaults. This sets the extender’s IP address
to 192.168.1.250. This procedure is explained in “I Need to Restore the Default Password
and Configuration Settings” on page 30.
If the error persists, you might have a hardware problem and should contact Technical
Support.
Verify if the LAN or Internet port lights are not on when the Ethernet connection is made:
1.
Make sure that the Ethernet cable connections are correct between the extender and the
gateway/router.
2. Make sure that the Ethernet cable connections are secure at the extender and at the computer.
3. Make sure that power is turned on to the connected computer.
4. Make sure that you are using Ethernet cables like the cable that was supplied with the WiFi
range extender.
For more information about the status lights, see “Extender Front Panel” on page 3.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WPN824EXT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WPN824EXT in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WPN824EXT

Netgear WPN824EXT User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info