493440
29
Zoom out
Zoom in
Previous page
1/41
Next page
Troubleshooting 28
Make sure that the network settings of the computer are correct:
1. Verify that your LAN-connected computers are configured to obtain an IP address
automatically through DHCP. For help with this, see the documentation for your computer or
“Related Documents” on page 41.
2. Verify whether the MAC address is needed. Some cable modem services require you to use
the MAC address of the computer registered on the account. If this is the case, in the Router
MAC Address section of the Basic Settings screen, select Use this Computer’s MAC
Address. To save your settings, click Apply. Restart the network in the correct sequence.
Check the router status lights to verify correct router operation:
If the Power light does not turn solid green within 2 minutes after you turn the router on, reset the
router according to the instructions in “Restoring the Default Password and Configuration
Settings” on page 40.
Checking Basic Router Functions
After you turn on power to the router, check that the following sequence of events has occurred:
1. When power is first applied, verify that the Power light is on and that it is solid amber while
the router boots up (see “Front Panel” on page 3 for an illustration).
2. Verify that the Power light turns amber within a few seconds, indicating that the self-test
procedure is running.
3. After approximately 90 seconds, verify that:
a. The color of the Power light changes to green.
b. The LAN port lights are lit for any local ports that are connected.
If a port’s light is lit, a link has been established to the connected device. If a LAN port is
connected to a 100 Mbps device, verify that the port’s light is green. If the port is 10
Mbps, the light will be amber.
c. The Internet port is connected and its light is lit.
4. If you have enabled WPS security, verify that the WPS button light on the front panel turns off.
If the correct behavior does not occur, check for a remedy from the following table.
Table 3. Troubleshooting the router’s LED behavior
LED Behavior Recommended Action
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR2200 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNR2200

Netgear WNR2200 Installation Guide - English - 2 pages

Netgear WNR2200 User Manual - English - 145 pages

Netgear WNR2200 Installation Guide - German - 44 pages

Netgear WNR2200 Installation Guide - Dutch - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info