519682
118
Zoom out
Zoom in
Previous page
1/134
Next page
118 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
3. From the Method pull-down menu, select Ping. The screen expands, enabling you to
configure ping fields.
4. Specify the fields that are explained in the following table.
Table 6-1. Health Check Settings
Field Description
Ping Host The IP address of the host to which the continuous ping should be sent. By default,
the IP address of the default gateway that you selected in “Configuring IP Settings”
on page 20 is used as the ping host, and the Ping Host field is masked out.
Deselect the Use default gateway as Ping Host checkbox to specify a host in the
Ping Host field.
Interval The interval in seconds at which the host is pinged. You can select 10 (default), 30,
60, or 120 seconds.
Retries The number of times that the wireless access point attempts to ping the host after
the initial attempt fails. You can select 1, 3 (default), 5, or 7. If all pings fail, the
connection between the wireless access point and the host is terminated, and the
Event Log will show the message “Health Check: Link Down.” If the connection
comes up again, the Event Log will show the message “Health Check: Link Up.”
5. Click Save or Save to Flash & Activate to save your settings.
Using the Ping, Traceroute, and NsLookup Utility
These diagnostic tools are not required if the wireless access point functions normally. As
port of a troubleshooting procedure, you can send a ping packet, traceroute, or Nslookup
request to an IP address or host name.
To use diagnostic tools:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info