519682

Netgear WGAP150 Manual

56
Zoom out
Zoom in
Previous page
1/134
Next page
56 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
5. Specify the fields as explained in Table 3-9.
Table 3-9. Filter Settings
Field Descriptions
Name Assign a name to the filter policy.
Source MAC
Address
The source MAC address of the incoming traffic
Destination MAC
Address
The destination MAC address for the incoming traffic.
Source IP Address
/ Netmask
The source IP address and optional netmask of the incoming traffic. This field is
not applicable when you select ARP as the protocol.
Destination IP
Address / Netmask
The destination IP address and optional netmask for the incoming traffic. This field
is not applicable when you select ARP as the protocol.
Source Port The source port of the incoming traffic. This field is applicable only when you select
TCP or UDP as the protocol.
Destination Port The destination port for the incoming traffic. This field is applicable only when you
select TCP or UDP as the protocol.
Protocol Select the protocol(s) to which the filter rule should apply from the pull-down menu:
• tcp. The rule applies only to incoming Transmission Control Protocol (TCP)
traffic.
• udp. The rule applies only to incoming User Datagram Protocol (UDP) traffic.
• icmp. The rule applies only to incoming Internet Control Message Protocol
(ICMP) traffic.
• arp. The rule applies only to incoming Address Resolution Protocol (ARP)
traffic.
• all. The rule applies to incoming traffic of any protocol. This is the default
setting.
Policy Select the policy action from the pull-down menu:
• accept. All incoming traffic that matches the policy is accepted.
• drop. All incoming traffic that matches the policy is dropped. This is the default
setting.
Enable The policy is activated by default after you have added the policy to the policy table
and you have clicked Save or Save to Flash & Activate.
Deselect the Enabled checkbox to add the policy to the policy table without
allowing it to be activated after you have clicked Save or Save to Flash & Activate.
After you have specified the filter fields, click Add to List to add the policy to the policy
table or click Clear to clear the filter fields and return the settings to default.
If you want to remove a policy from the policy table, click Remove in the rightmost column
of the policy that you want to remove.
6. Click Save or Save to Flash & Activate to save your settings.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info