519682
54
Zoom out
Zoom in
Previous page
1/134
Next page
54 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Configuring Wireless Quality of Service
To control reliability and availability of the wireless access point, you can allocate quality of
service (QoS) levels per SSID. For information about general default QoS levels (Gold,
Silver, and Bronze), multicast filtering, and multicast data rates, see
“Configuring Basic
Wireless Network Settings” on page 27, in particular Figure 2-12 and Table 2-7. In addition to
these general QoS settings, you can assign specific traffic bandwidth limits (also referred to
as traffic shaping), filter incoming traffic, and configure advanced QoS settings, all per
individual SSID.
Configuring Wireless Traffic Shaping
To set limits on the bandwidth of incoming and outgoing wireless traffic for an individual
SSID:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > Wireless Networks. The Wireless Networks screen opens,
displaying 16 wireless security profiles (see
Figure 3-2 on page 38).
3. To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. Scroll down to the Bandwidth Settings section.
4. Select the Bandwidth Management Enabled checkbox. The screen expands to display the
Upstream Limit and Downstream Limit fields.
5. Specify the bandwidth limits:
Upstream Limit. Specify the bandwidth limit for outgoing traffic limit in kbps. The
default is zero, which specifies unlimited bandwidth.
Downstream Limit. Specify the bandwidth limit for incoming traffic in kbps. The
default is zero, which specifies unlimited bandwidth.
6. Click Save or Save to Flash & Activate to save your settings.
Figure 3-15
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info