519682
41
Zoom out
Zoom in
Previous page
1/134
Next page
| 41
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Configuring Legacy 802.1X (or Dynamic WEP)
To use legacy 802.1X security, you also must define RADIUS server settings. For information
about RADIUS servers, see “Configuring RADIUS Server Settings” on page 45.
When you select 802.1X from the Security Policy pull-down menu, the section expands to
display the 802.1X fields.
Specify the fields that are explained in Table 3-3.
Table 3-3.
Field Descriptions
WEP Key Size This pull-down menu lets you select the encryption key size:
40 bits (64-bit WEP)
104 bits (128-bit WEP)
Rekeying Period The period during which the broadcast key remains valid. When the period expires, the
broadcast key is no longer valid and must be renewed. The default is 14400 seconds
(4 hours). To disable re-keying, enter a value of 0.
Configuring WPA and WPA-PSK (TKIP)
WPA security requires RADIUS-based 802.1x authentication, so you also must define
RADIUS server settings. For information about RADIUS servers, see “Configuring RADIUS
Server Settings” on page 45. WPA-PSK security uses a pre-shared key (PSK) and does not
require authentication from a RADIUS server. Both methods use Temporal Key Integrity
Protocol (TKIP) encryption.
Shared Key
Authentication
The default authentication setting is Open System authentication. Select the Shared Key
Authentication checkbox to enable shared key authentication.
Note: The authentication method is separate from the data encryption. You can select an
authentication method that requires a shared key but still leaves the data transmissions
unencrypted. If you require strong security, use both the Shared Key and WEP
encryption settings.
Figure 3-5
Table 3-2.
Field Descriptions
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info