519682
39
Zoom out
Zoom in
Previous page
1/134
Next page
| 39
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
3. To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. The first section on the screen is the Basic Settings
section.
“Configuring Basic Wireless Network Settings” on page 27 explains the fields in this
section. Scroll down to the Security Settings section.
4. Select one of the following security options from the Security Policy pull-down menu:
None. No security is the default settings.
Static WEP. See “Configuring Static WEP” on page 40.
802.1X. See “Configuring Legacy 802.1X (or Dynamic WEP)” on page 41.
WPA-TKIP. See “Configuring WPA and WPA-PSK (TKIP)” on page 41.
WPA2-AES. See “Configuring WPA2 and WPA2-PSK (AES)” on page 43.
WPA-TKIP and WPA2-AES. See “Configuring WPA+WPA2 and
WPA-PSK+WPA2-PSK Mixed Modes” on page 44.
5. Click Save or Save to Flash & Activate to save your settings.
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Save to Flash and
Activate. Reconfigure your wireless computer to match the new
settings, or access the wireless access point from a wired computer
to make further changes.
For more information about wireless security options, see the online document that you can
access from
“Wireless Networking Basics” in Appendix B.
BSSID The detailed BSSID for the wireless security profile. This BSSID consist of
the MAC address of the wireless access point with the last digit altered. If
the MAC address ends with F0, the BSSID for the first profile ends with F1,
for the second profile with F2, for the thirds profile with F3, and so on.
Edit (hyperlink) The hyperlink to the Edit Wireless Network screen with the configurable
fields for the wireless security profile.
Figure 3-3
Table 3-1. Wireless Network Settings (continued)
Field Description
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info