519671
61
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Advanced Configuration 4-13
v1.0, June 2007
b only – Supports only 802.11b.
The default is g and b.
7. Click Apply to save your settings.
Verify your connection by clicking Site Survey. The ID radio button of your wireless
connection should be enabled. You can also click Information. The Associated AP should
show the MAC address of the remote AP. If no connection has been made, a “no association”
message will display.
.
The scenario below illustrates WG602v4 in Client Mode where multiple devices are connected
behind the wired Ethernet side (PC1 and Printer). The WG602v4 Client, with a Network Type of
Infrastructure, acts like a wireless bridge between two wired LANs. The WG602v4, in AP mode
on the other LAN, provides access to the Internet.
Table 4-1. Site Survey Fields
Field Description
ID Identifies a network that you can connect to or that you are connected to.
SSID The Service Set Identifier (SSID) of the access point or peer device. Note that, as a security
measure, some wireless access points do not broadcast their SSID. In such cases, the SSID
field will be blank even though the rest of the information will still be displayed.
Security Identifies the wireless network security type. In order to connect to this network you must
have the same security type enabled.
Mode Identifies the type of wireless network—Access Point (Infrastructure) or peer-to-peer (Ad
Hoc)
Channel Identifies the direct-sequence channel that the access point or peer is currently using.
Signal Identifies the signal strength of the communications.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info