519671
60
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
4-12 Advanced Configuration
v1.0, June 2007
To connect to another AP or to a client running in Ad-Hoc Mode:
2. Click Site Survey. The Site Survey table will display a list of the available wireless networks
that you can connect to. Both remote APs and Ad-Hoc devices will display. The parameters of
the Site Survey table are described in Table 4-1 on page 4-13.
3. Select a different connection by checking the radio box in the ID column next to the SSID in
the Site Survey table.
4. Click Apply. The Wireless Settings screen will again display showing the SSID of the remote
AP or AD-Hoc device you selected in the Wireless Network Name Field.
If you selected a remote AP, the Network Type will be Infrastructure. The Channel/
Frequency is not selectable and will default to the channel of the remote AP.
If you selected an Ad-Hoc device, the Network Type will be Ad-Hoc. From the Channel/
Frequency pull down menu, select the shared channel for that peer connection. The
default is 11.
5. From the Country/Region pull-down menu, select your country or region (if you have not
already done so).
This field displays the region of operation for which the wireless interface is intended. It may
not be legal to operate the client bridge in a country/region other than the country/region
shown here. If your country or region is not listed, please check with your local government
agency or check our website for more information on which channels to use.
6. From the Mode pull-down menu, select the desired wireless operating mode. The options are:
g and b – Supports both 802.11g and 802.11b.
g only – Supports only 802.11g.
Figure 4-9
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info