519671
49
Zoom out
Zoom in
Previous page
1/78
Next page
4-1
v1.0, June 2007
Chapter 4
Advanced Configuration
This chapter describes how to configure the advanced features of your WG602v4 to one of four
Access Point Modes or in Client Mode.These features can be found under the Advanced heading
in the main menu on the Wireless Settings Wireless Bridging screens.
Configuring Access Point Modes
The NETGEAR WG602v4 54 Mbps Wireless Access Point lets you build large wireless networks.
Examples of wireless bridging configurations are:
Access Point. Standard Access Point mode (default mode). Operates as a standard 802.11g or
802.11b Access Point. In this mode, the WG602 will communicate only with wireless clients.
Wireless point-to-point bridging. Communicates with single bridge-mode wireless access
point.
Wireless multi-point bridging. Acts as the “master” and communicates with up to four
bridge-mode wireless access points. All of the other wireless access points communicate
through the WG602v4 when theWG602v4 is in this mode.
Repeater with Wireless Client Association. Acts as a “repeater” and forwards all traffic to a
remote access point.
Client Mode. Operates as a client bridge only and sends traffic to either a remote access point
(Infrastructure) or a peer device (Ad-Hoc). MAC Cloning can also be enabled when in Client
Mode by entering the MAC Clone Address.
Configuring a WG602v4 as a Point-to-Point Bridge
In this mode, the WG602v4 will communicate with a single bridge-mode wireless access point
when you enter the MAC address (physical address) of the other Bridge Mode Wireless Station. In
addition, if you check the Enable Wireless Client Association radio box, wireless clients will
Warning: If Client Mode is selected, the wireless access point will reboot and all
settings will be lost. You must then reconfigure the device.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info