519671
47
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Management 3-5
v1.0, June 2007
Rebooting the Wireless AP
The Reboot option restarts the wireless access point using its current settings
To reboot the wireless access point:
1. From under the Management menu, select Reboot AP. The Reboot AP screen will display.
2. Check the Yes radio box, and then click Apply. The WG602v4 will reboot.
Restoring Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore Factory Default function, which restores all factory settings.
After a restore, all or the WG602v4’s settings will revert to the default settings; for example, User
Name will be admin, the Password will be password, the DHCP client will be enabled. and the
NetBIOS name is reset to NETGEAR plus the last 6 digits of the MAC address.
To restore the factory default settings:
1. From under Management on the main menu, click Restore Factory Default. The Restore
Factory Default screen will display.
2. Check the Yes radio box, and then click Apply. The WG602v4 factory default settings will be
restored.
Using the Reset Button to Reboot or Restore Factory Defaults
If you don’t have the login password or the IP address of the wireless access point, you can use the
default Reset button on the bottom of the device. The reset button has two functions:
Reboot. When pressed and released quickly, the wireless access point will reboot (restart).
Reset to Factory Defaults. When held down for at least 10 seconds (until the LED blinks
rapidly), you can clear all data and restore all settings to the factory default values.
To clear all data and restore the factory default values:
1. Use something with a small point, such as a pen, to press the Reset button in for at least 10
seconds (until the LED blinks rapidly).
2. Release the Reset button.
The factory default configuration has now been restored, and the WG602v4 is ready for use.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info