531672
48
Zoom out
Zoom in
Previous page
1/54
Next page
NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
3-2
v1.0, March 2008
Ad Hoc Mode is Not Working Correctly
You must click the Initiate Ad Hoc button before you click Apply.
To start an Ad Hoc network:
1. On the Settings tab, fill in the Network Name (SSID) field.
The Smart Wizard keeps asking me to save
settings.
If you change the settings the Smart Wizard offers you the
chance to save the changes. To avoid this prompt, simply click
Apply before you close the Smart Wizard.
Two WG111v3 icons are in the system tray. You have an older software version installed on your system
and it needs to be removed. See “Removing the Software” on
page 1-11, or “Upgrading the Wireless Adapter Software” on
page 1-11.
I can connect to the access point, but not
the other computers on the network or to
the Internet.
This could be a physical layer problem or a network
configuration problem.
1. Check to make sure that the access point is physically
connected to the Ethernet network.
2. Make sure that the IP addresses and the Windows
networking parameters are all configured correctly. See
the link to
“Internet Networking and TCP/IP Addressing”
on page B-1.
3. Restart the cable or DSL modem, router, access point, and
computer.
Viewing the IP address. To view the wireless adapter IP address, click the WG111v3
icon to open the Smart Wizard. Then check the IP address in
the About tab.
No IP address is assigned to the Wireless
Adapter.
This may occur if you upgraded your wireless adapter
software and did not reboot your system.
Either restart your computer, or connect to a different access
point.
It does not usually help to shut down the Smart Wizard or
disable/enable the card.
Note: Be sure that all computers in your Ad Hoc network are configured with static IP
addresses in the same subnet.
Table 3-1. Troubleshooting Tips (continued)
Problem Action
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG111v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG111v3 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG111v3

Netgear WG111v3 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info