531672
47
Zoom out
Zoom in
Previous page
1/54
Next page
3-1
v1.0, March 2008
Chapter 3 Troubleshooting
This chapter provides information about troubleshooting your wireless adapter. For information
about connecting to wireless networks and the Internet, see
“Connecting to Wireless Networks and
the Internet” on page 1-8.
Troubleshooting Tips
Use the information below to solve common problems you may encounter. Also, refer to the
knowledge base on the NETGEAR website at
http://www.netgear.com/support.
Table 3-1. Troubleshooting Tips
Problem Action
The LED is not lit The wireless adapter is not connected to the USB port
properly or the WG111v3 software is not loaded.
Remove and reinsert the wireless adapter.
Check the Windows device manager to see if the wireless
adapter is recognized and enabled. Reload the WG111v3
software, if necessary.
Try to install the wireless adapter in a different USB slot on
your system if one is available.
The LED blinks but the wireless adapter is
not connected to an access point.
The wireless adapter is trying to connect to an access point,
but cannot connect.
The access point may not be powered on.
Or, the access point and the wireless adapter are not
configured with the same wireless parameters. Check the
SSID and wireless security settings.
I cannot connect to an access point.
The access point is available and there is
good signal strength.
If the access point is WPA-PSK protected, you need the
correct WPA-PSK passphrase. Otherwise, the wireless
adapter will still be connected to the previous access point
and you will not be able to change to the WPA-PSK access
point.
If the access point is WEP protected (either 64 or 128 bit
encryption), you will be prompted to enter the WEP
encryption security information.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG111v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG111v3 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG111v3

Netgear WG111v3 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info