710463
140
Zoom out
Zoom in
Previous page
1/149
Next page
Alternatively, you can configure your computer manually with DNS addresses, as explained in your
operating system documentation.
Your computer might not use the correct TCP/IP settings.
If your computer obtains its information by DHCP, reboot the computer and verify the address of the
switch or Internet modem to which the access point is connected.
For information about TCP/IP problems, see Troubleshoot Your Network Using the Ping Utility on page
141.
You Cannot Log In to the Access Point Over a LAN
Connection
If you are unable to log in to the access point from a computer on your local network and use the access
point’s local browser interface, check the following:
If you are using an Ethernet-connected computer, check the Ethernet cable between the computer and
the access point.
Make sure that the IP address of your computer is in the same subnet as the access point.
If you disabled the access point’s DHCP client and configured a fixed (static) IP address when you
connected the access point to network or Internet modem (see Disable the DHCP Client and Specify a
Fixed IP Address on page 88), change the IP address and subnet mask on your computer to so that
the IP addresses of your computer and the access point are in the same IP subnet.
If your access point’s IP address was changed (for example, the DHCP server in your network issued
an IP address to the access point) and you do not know the current IP address, use an IP scanner
application to detect the IP address. If you still cannot find the IP address, reset the access point’s
configuration to factory defaults.This sets the access point’s IP address to 192.168.0.100. For more
information, see Use the Reset Button on page 110.
Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,
click the Refresh button to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.
Make sure that you are using the correct login information. The user name is admin and the password
is the one that you specified the first time that you logged in. Make sure that Caps Lock is off when you
enter this information.
Changes Are Not Saved
If you are logged in to the access point’s local browser interface and the access point does not save the
changes that you make on a page, do the following:
When entering configuration settings, always click the Apply button before moving to another page or
tab or your changes are lost.
Click the Refresh or Reload button in the web browser. It is possible that the changes occurred but
that the old settings remain in the web browser’s cache.
Diagnostics and Troubleshooting
140
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC505 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info