710463
135
Zoom out
Zoom in
Previous page
1/149
Next page
DescriptionSetting
The number of pings that the access point must send.The default number is 16.Ping Count
The size of each ping packet.The default size is 64 bytes.Packet Size (in Bytes)
The IP address that the access point must ping.IP Address
6. To start the ping test, click the Start button.
The results of the ping test display in the Ping Result field.
Quick Tips for Troubleshooting
If your network is unresponsive or does not function normally, restart your network:
1. Unplug the Ethernet cable from the access point to your network switch or Internet modem.
2. If you use a power adapter, disconnect it from the access point.
3. Plug in the Ethernet cable from the access point to your network switch or Internet modem.Wait two
minutes.
4. If you use a power adapter, connect it to the access point and wait two minutes.
If you cannot connect over WiFi to the access point, try the following:
Make sure that the WiFi LED on the access point is not off.
If the WiFi LED is off, one or both WiFi radios are probably off too. For more information about the WiFi
radios, see Turn a Radio On or Off on page 51.
Make sure that the WiFi settings in your WiFi device and access point match exactly.
For a device that is connected over WiFi, the WiFi network name (SSID) and WiFi security settings of
the access point and WiFi device must match exactly.
For information about accessing the access point for initial configuration over a WiFi connection, see
Connect to the Access Point for Initial Configuration on page 16.
Make sure that your WiFi device supports the security that you are using for your WiFi network
(WPA2-PSK or WPA-PSK and WPA2-PSK). For more information, see Set Up and Manage WiFi
Networks on page 31.
Make sure that your WiFi device is not too far from the access point or too close. To see if the signal
strength improves, move your WiFi device near the access point but at least 6 feet (1.8 meters) away.
Make sure that the WiFi signal is not blocked by objects between the access point and your WiFi device.
Make sure that the access point’s SSID broadcast is not disabled.
If the access point’s SSID broadcast is disabled, the WiFi network name is hidden and does not display
in your WiFi device’s scanning list.To connect to a hidden network, you must enter the network name
and the WiFi password. For more information about the SSID broadcast, see Set Up and Manage WiFi
Networks on page 31.
Make sure that your WiFi device does not use a static IP address but is configured to receive an IP
address automatically with DHCP. (For most devices, DHCP is the default setting.)
Diagnostics and Troubleshooting
135
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC505 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info