710464
8
Zoom out
Zoom in
Previous page
1/79
Next page
Figure 2. Access point back panel
Viewed from left to right, the back panel contains the following components:
WPS button. Press the WPS button to join the access point’s WiFi network without typing the WiFi
password. For more information, see Wi-Fi Protected Setup Method on page 24.
WiFi On/Off button. Press the WiFi On/Off button for two seconds to turn the WiFi radios on or off.
LAN ports 1–4. Four Gigabit Ethernet RJ-45 LAN ports to connect the access point to Ethernet devices.
You can use one of the LAN ports to connect the access point to a router, network switch, or network
hub (see Connect the Access Point to Your Router or Network on page 12).You can use the other LAN
ports to connect the access point to Ethernet devices such as computers.
Reset button. Press the Reset button to reset the access point to factory default settings. For more
information, see Use the Reset Button on page 45.
Power On/Off button. Press the Power On/Off button to provide power to the access point.
DC power connector. Connect the power adapter that came in the product package to the DC power
connector.
Position the Antennas
Although you can swivel the antennas in any direction, for best performance, we recommend that you
position the access point’s antennas perpendicular to each other, that is, at a 90-degree angle.
Figure 3. Examples of recommended antenna positions
Hardware Overview of the Access Point
8
802.11ac Wireless Access
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info