710464
7
Zoom out
Zoom in
Previous page
1/79
Next page
Table 1. LED descriptions
DescriptionLED
Solid green.The access point is ready.
Solid green temporarily, blinking green temporarily, and finally solid green. The access
point is starting or was reset to factory default settings and is restarting.
For more information about resetting the access point to factory default settings, see Return
the Access Point to Its Factory Default Settings on page 44.
Blinking green.The access point is starting or upgrading firmware.
If the Power LED is blinking green at any other time, see Power LED Remains Blinking Green
on page 70.
Off. Power is not supplied to the access point.
Power
Solid green. (Wi-Fi Protected Setup) is ready for use. By default, the WPS LED is off.
Blinking green for two minutes. Someone pressed the WPS button on the access point to
join the WiFi network.
For more information, see Wi-Fi Protected Setup Method on page 24.
WPS
Solid green. One or both WiFi radios are operating.
Blinking green. One or both WiFi radios are sending or receiving traffic.
Off. Both WiFi radios are off.
For more information, seeControl the WiFi Radios on page 37.
WiFi
Ethernet LAN ports 1–4:
Solid green. A powered-on Ethernet device is connected to the LAN port.
Blinking green.The LAN port is sending or receiving traffic.
Off. No powered-on Ethernet device is connected to the LAN port.
LAN
Back Panel
The back panel of the access point provides ports, buttons, and a DC power connector.
Hardware Overview of the Access Point
7
802.11ac Wireless Access
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info