670480
156
Zoom out
Zoom in
Previous page
1/163
Next page
A login window opens.
4. Enter the router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Click the ADVANCED tab.
The ADVANCED Home page displays.
6. Check to see that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router did not
obtain an IP address from your ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your cable or DSL modem to
recognize your new router by restarting your network. For more information, see Sequence to Restart Your
Network on page 153.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of the following:
Your Internet service provider (ISP) might require a login program. Ask your ISP whether they require PPP
over Ethernet (PPPoE) or some other type of login.
If your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computer’s host name. Assign the computer host name of your ISP account
as the account name on the Internet Setup page.
If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer’s
MAC address, do one of the following:
- Inform your ISP that you bought a new network device and ask them to use the router’s MAC address.
- Configure your router to clone your computer’s MAC address.
If your router obtained an IP address, but your computer does not load any web pages from the Internet, it might
be for one or more of the following reasons:
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric
IP addresses.Typically, your ISP provides the addresses of one or two DNS servers for your use. If you
entered a DNS address during the router’s configuration, reboot your computer, and verify the DNS address.
You can configure your computer manually with DNS addresses, as explained in your operating system
documentation.
The router might not be configured as the TCP/IP gateway on your computer.
If your computer obtains its information from the router by DHCP, reboot the computer and verify the gateway
address.
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run
that software after installing your router.You might need to go to Internet Explorer and select Tools >
Internet Options, click the Connections tab, and select Never dial a connection. Other browsers provide
similar options.
Troubleshooting
156
Nighthawk X10 AD7200 Smart WiFi Router
156


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R9000 - Nighthawk X10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R9000 - Nighthawk X10 in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R9000 - Nighthawk X10

Netgear R9000 - Nighthawk X10 Additional guide - English - 16 pages

Netgear R9000 - Nighthawk X10 Quick start guide - English - 2 pages

Netgear R9000 - Nighthawk X10 Quick start guide - German - 2 pages

Netgear R9000 - Nighthawk X10 Additional guide - Dutch - 16 pages

Netgear R9000 - Nighthawk X10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info