670480
155
Zoom out
Zoom in
Previous page
1/163
Next page
When you connect the router’s Internet port to a modem, use the cable that was supplied with the modem.
This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable.
WiFi LED Is Off
If the WiFi LED stays off, check to see if someone pressed the WiFi On/Off button on the router.This button
turns the WiFi radios in the router on and off. The WiFi LED is lit when the WiFi radios are turned on.
You Cannot Log In to the Router
If you are unable to log in to the router from a computer on your local network, check the following:
If you are using an Ethernet-connected computer, check the Ethernet connection between the computer
and the router.
Make sure that the IP address of your computer is on the same subnet as the router. If you are using
the recommended addressing scheme, your computer’s address is in the range of 192.168.1.2 to
192.168.1.254.
If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate
and assign an IP address if the computer cannot reach a DHCP server.These autogenerated addresses
are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer
to the router, and reboot your computer.
If your router’s IP address was changed and you do not know the current IP address, clear the router’s
configuration to factory defaults.This sets the router’s IP address to 192.168.1.1. For more information,
see Factory Settings on page 161.
Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,
click the Refresh button to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.
Make sure that you are using the correct login information. The user name is admin, and the default
password is password. Make sure that Caps Lock is off when you enter this information.
If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your
network, the router cannot perform many gateway services. For example, the router cannot convert
ADSL or cable data into Ethernet networking information. NETGEAR does not support such a
configuration.
You Cannot Access the Internet
If you can access your router but not the Internet, check to see if the router can obtain an IP address from
your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an
IP address from the ISP.You can determine whether the request was successful using the ADVANCED
Home page.
To check the WAN IP address:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Select an external site such as netgear.com.
3. Type http://www.routerlogin.net.
Troubleshooting
155
Nighthawk X10 AD7200 Smart WiFi Router
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R9000 - Nighthawk X10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R9000 - Nighthawk X10 in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R9000 - Nighthawk X10

Netgear R9000 - Nighthawk X10 Additional guide - English - 16 pages

Netgear R9000 - Nighthawk X10 Quick start guide - English - 2 pages

Netgear R9000 - Nighthawk X10 Quick start guide - German - 2 pages

Netgear R9000 - Nighthawk X10 Additional guide - Dutch - 16 pages

Netgear R9000 - Nighthawk X10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info