670487
164
Zoom out
Zoom in
Previous page
1/173
Next page
1.
When power is first applied, verify that the Power LED is lit.
2. After about two minutes, verify the following:
The Power LED is solid white.
The Internet LED is lit.
The WiFi LED is lit unless you turned off the WiFi radio.
You can use the LEDs on the front panel of the router for troubleshooting.
Power LED Is Off or Blinking
This could occur for a number of reasons. Check the following:
Make sure that the power adapter is securely connected to your router and securely connected to a
working power outlet.
Make sure that you are using the power adapter that NETGEAR supplied for this product.
If the Power LED blinks slowly and continuously, the router firmware is corrupted. This can happen if a
firmware upgrade is interrupted, or if the router detects a problem with the firmware. If the error persists,
it is likely that a hardware problem exists. For recovery instructions, or help with a hardware problem,
contact technical support at netgear.com/support.
Power LED Stays Amber
When the router is turned on, the Power LED lights amber for up to two minutes and then turns white. If the
LED does not turn white, this indicates a problem with the router.
If the Power LED is still amber three minutes after you turn on power to the router, do the following:
Cycle the power to see if the router recovers.
Press and hold the Reset button to return the router to its factory settings. For more information, see
Factory Settings on page 171.
If the error persists, a hardware problem might be the cause. Contact technical support at
netgear.com/support.
LEDs Never Turn Off
When the router is turned on, the LEDs light for about 10 seconds and then turn off. If all the LEDs stay on,
this indicates a fault within the router.
If all LEDs are still lit one minute after power-up, do the following:
Cycle the power to see if the router recovers.
Press and hold the Reset button to return the router to its factory settings. For more information, see
Factory Settings on page 171.
If the error persists, a hardware problem might be the cause. Contact technical support at
netgear.com/support.
Troubleshooting
164
Nighthawk X4S AC2600 Smart WiFi Router
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R7800 - Nighthawk X4S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R7800 - Nighthawk X4S in the language / languages: English as an attachment in your email.

The manual is 8,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R7800 - Nighthawk X4S

Netgear R7800 - Nighthawk X4S Additional guide - English - 16 pages

Netgear R7800 - Nighthawk X4S Quick start guide - English - 2 pages

Netgear R7800 - Nighthawk X4S Additional guide - German - 16 pages

Netgear R7800 - Nighthawk X4S User Manual - German - 183 pages

Netgear R7800 - Nighthawk X4S Quick start guide - German - 2 pages

Netgear R7800 - Nighthawk X4S Additional guide - Dutch - 16 pages

Netgear R7800 - Nighthawk X4S Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info