681123

Netgear R7500v2 - Nighthawk X4 Manual

174
Zoom out
Zoom in
Previous page
1/184
Next page
addresses are in the range of 169.254.x.x. If your IP address is in this range, check the connection
from the computer to the router, and reboot your computer.
• If your router’s IP address was changed and you do not know the current IP address, clear the router’s
configuration to factory defaults.This sets the router’s IP address to 192.168.1.1. For more information,
see Factory Settings on page 181.
• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet
Explorer, click the Refresh button to be sure that the Java applet is loaded.
• Try quitting the browser and launching it again.
• Make sure that you are using the correct login information. The user name is admin, and the default
password is password. Make sure that Caps Lock is off when you enter this information.
• If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your
network, the router cannot perform many gateway services. For example, the router cannot convert
ADSL or cable data into Ethernet networking information. NETGEAR does not support such a
configuration.
You Cannot Access the Internet
If you can access your router but not the Internet, check to see if the router can obtain an IP address from
your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests
an IP address from the ISP.You can determine whether the request was successful using the ADVANCED
Home screen.
To check the WAN IP address:
1. Launch a web browser from a computer or wireless device that is connected to the network.
2. Select an external site such as www.netgear.com www.netgear.com.
3. Type http://www.routerlogin.net .
A login window opens.
4. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home screen displays.
5. Click the ADVANCED tab.
The ADVANCED Home screen displays.
6. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router did not obtain
an IP address from your ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your cable or DSL modem
to recognize your new router by restarting your network. For more information, see Sequence to Restart Your
Network on page 171.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of the following:
Troubleshooting
174
… 174 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R7500v2 - Nighthawk X4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R7500v2 - Nighthawk X4 in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R7500v2 - Nighthawk X4

Netgear R7500v2 - Nighthawk X4 Quick start guide - German - 22 pages

Netgear R7500v2 - Nighthawk X4 Quick start guide - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info