670498
69
Zoom out
Zoom in
Previous page
1/78
Next page
Troubleshooting
69
N150 and N300 Wireless Routers
Make sure that the Ethernet cable is securely connected to the router Internet port and
the modem.
Make sure that power is turned on to the connected modem.
Be sure that you are using the correct cable.
When you connect the router’s Internet port to a cable or DSL broadband modem, use
the cable that was supplied with the cable or DSL broadband modem.
This cable can be
a standard straight-through Ethernet cable or an Ethernet crossover cable.
WiFi LED Is Off
If the WiFi LED stays off, check to see if someone disabled the wireless radio or set up a
wireless schedule. For more information about these settings, see Control the Wireless
Radio on page 38. The WiFi LED is lit when the wireless radio is turned on.
Cannot Log In to the Router
If you cannot log in to the router from a computer or wireless device on your local network,
check the following:
1. Make sure that your computer or wireless device is connected to the router’s network.
- For a WiFi connection, select the network and entered its WiFi password.
- For a wired connection, use an Ethernet cable to connect your computer to an
Ethernet LAN port on the router (not the Ethernet Internet port).
2. Launch a web browser and enter www
.routerlogin.net.
3. If a login prompt does not display
, try the following:
a. Close the browser and launch it again.
b. Make sure that your browser has Java, JavaScript, or
ActiveX enabled. If you are
using Internet Explorer, click the Refresh button to be sure that the Java applet is
loaded.
c. If you are using a wired connection, check the Ethernet connection between the
computer and the router.
One of the router Ethernet LEDs
lights to
show that your computer is connected.
4. If the login prompt displays, but you cannot log in, try the following:
a. Make sure that you are using the correct login information.
The user name is admin and the default password is password. Make sure that
Caps Lock is of
f when you enter this information.
b. If you customized the IP address scheme that the router uses, see Troubleshoot IP
Addresses on page 74.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v5 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info