670498
67
Zoom out
Zoom in
Previous page
1/78
Next page
Troubleshooting
67
N150 and N300 Wireless Routers
- Does your computer or wireless device support the security that you are using for
your WiFi network (WEP, WPA, or WPA2)?
For information about wireless security settings, see Specify Basic WiFi Settings on
page 33.
- Did you set up a wireless access list in the router?
If you set up an access list, you must add the MAC address for each computer and
wireless device to the list. For more information about access list settings, see Set up
a Wireless Access List on page 40.
Changes Not Saved
If the router does not save the changes you make through the NETGEAR genie screens,
check the following:
When you log in to the router and change the settings on a screen, always click the Apply
button before you move to another screen or tab, or your changes are lost.
Click the Refresh or Reload button in the web browser
. The changes might have
occurred, but the old settings might be in the web browser’s cache.
Troubleshoot with the LEDs
The LEDs on the front panel of the router indicate its status.
Apply Power to the Router and Check the LEDs
To apply power to the router and check the LEDs:
1. Connect the power adapter cord that came with the router and plug it in to a power
outlet.
The Power LED lights and turns amber within a few seconds. This indicates that the
self-test is running.
2. After approximately 30 seconds, verify that the LEDS are lit as follows:
The Power LED
is lit solid green.
The WiFi LED
is lit solid green.
The Internet LED
is lit solid green.
The Ethernet LEDs (1 through 4)
are lit solid green or solid amber for
any computers cabled to the router by an Ethernet cable.
3. If the LEDs do not light as expected, use the LED behavior to troubleshoot the problem.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v5 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info