670507
80
Zoom out
Zoom in
Previous page
1/116
Next page
Advanced Settings
80
N300 Wireless Router JWNR2000v3
- If you are setting up a point-to-point bridge, select the Disable Wireless Client
Association check box.
- If you want all client traf
fic to go through the other access point (repeater with
wireless client association), leave the Disable Wireless Client Association check
box cleared.
Base Station MAC
Address. If your router is the repeater, enter the MAC address for
the access point that is the base station.
W
ireless Base Station. If your router is the base station, select this check box.
Disable W
ireless Client Association. If your router is the base station, selecting this
check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
Repeater MAC
Address (1 through 4). If your router is the base station, it can act as
the “parent” of up to 4 other access points. Enter the MAC addresses of the other
access points in these fields.
3. Click Apply.
Your settings are saved.
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You must know the wireless settings for both units. You must know the MAC
address of the remote unit. First, set up the base station first, and then set up the repeater.
To set up the base station:
1. Set up both units with the same wireless settings (SSID, mode, channel, and security).
The wireless security option must be set to None or WEP
.
2. Select ADV
ANCED > Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v3 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info