670507
79
Zoom out
Zoom in
Previous page
1/116
Next page
Advanced Settings
79
N300 Wireless Router JWNR2000v3
The router is always in dual-band concurrent mode, unless you turn off one radio. If you
enable the wireless repeater in either radio band, the wireless base station or wireless
repeater cannot be enabled in the other radio band. However, if you enable the wireless
base station in either radio band and use the other radio band as a wireless router or
wireless base station, dual-band concurrent mode is not affected.
For you to set up a wireless network with WDS, both access points must meet the
following conditions:
Both access points must use the same SSID, wireless channel, and encryption mode.
Both access points must be on the same LAN IP subnet.
That is, all the access point
LAN IP addresses are in the same network.
All LAN devices (wired and wireless computers) must be configured to operate in the
same LAN network address range as the access points.
To view or change the wireless repeater settings for the router:
1. Select ADV
ANCED > Advanced Setup > Wireless Repeating Function.
2. Configure the following wireless repeater settings:
Enable W
ireless Repeating Function. Select the check box for the 2.4 GHz or 5
GHz network to use the wireless repeating function.
W
ireless MAC of this router. This field displays the MAC address for your router for
your reference. You need to enter this MAC address in the corresponding Wireless
Repeating Function screen of the other access point you are using.
W
ireless Repeater. If your router is the repeater, select this check box.
Repeater IP
Address. If your router is the repeater, enter the IP address of the other
access point.
Disable W
ireless Client Association. If your router is the repeater, selecting this
check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v3 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info