670507
48
Zoom out
Zoom in
Previous page
1/116
Next page
genie Advanced Home
48
N300 Wireless Router JWNR2000v3
Subnet mask
Gateway IP address (the router’s LAN IP address)
Primary DNS server (if you entered a primary DNS address in the Basic Settings screen;
otherwise, the router’s LAN IP address)
Secondary DNS server (if you entered a secondary DNS address in the Basic Settings
screen)
To specify the pool of IP addresses that the modem router assigns:
1. Select ADVANCED > Setup > LAN Setup.
2. Make sure that the Use Router as DHCP Server check box is selected.
3. Specify the range of IP addresses.
For example, using the default addressing scheme, define a range between 192.168.1.2
and 192.168.1.254, although you might want to save part of the range for devices with
fixed addresses.
In the Starting IP Address field, specify the start of the range for the pool of IP address
in the same subnet as the modem router.
In the Ending IP Address field, specify the end of the range for the pool of IP address
in the same subnet as the modem router.
4. Click Apply.
Your changes are saved.
To disable the DHCP Server feature in the modem router:
1. Select ADVANCED > LAN Setup.
2. Clear the Use Router as DHCP Server check box.
3. Click Apply.
4. If no DHCP server is on your network, set your computers’ IP addresses manually so that
they can access the modem router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router’s DHCP server. Assign
reserved IP addresses to computers or servers that require permanent IP settings.
To reserve an IP address:
1. Select ADVANCED > Setup > LAN Setup.
2. In the Address Reservation section of the screen, click the Add button.
The Address Reservation screen displays.
3. If the device is in the Address Reservation Table, select its radio button.
The information from the Address Reservation Table populates the IP Address, MAC
Address, and Device Name fields.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v3 in the language / languages: English as an attachment in your email.

The manual is 7,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info