670508
71
Zoom out
Zoom in
Previous page
1/108
Next page
Chapter 6. Advanced Settings | 71
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
the attached computers from a pool of addresses specified in this screen. Each pool address
is tested before it is assigned to avoid duplicate addresses on the LAN.
Note: For most applications, the default DHCP and TCP/IP settings of the
router are satisfactory.
To specify a pool of IP addresses to be assigned, set the starting IP address and ending IP
address. These addresses should be part of the same IP address subnet as the router’s LAN
IP address. Using the default addressing scheme, you should define a range between
192.168.1.2 and 192.168.1.254, although you might wish to save part of the range for
devices with fixed addresses.
The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range you have defined
Subnet mask
Gateway IP address (the router’s LAN IP address)
Primary DNS server (if you entered a primary DNS address in the Basic Settings screen;
otherwise, the router’s LAN IP address)
Secondary DNS server (if you entered a secondary DNS address in the Basic Settings
screen)
To use another device on your network as the DHCP server, or to manually specify the
network settings of all of your computers, clear the Use Router as DHCP Server check box.
Otherwise, leave it selected. If this service is not selected and no other DHCP server is
available on your network, you need to set your computers’ IP addresses manually or they
will not be able to access the router.
Reserved IP Addresses Setup
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router’s DHCP server. Reserved IP
addresses should be assigned to servers that require permanent IP settings.
To reserve an IP address:
1. Select Advanced > LAN Setup and click the Add button.
2. In the IP Address field, type the IP address to assign to the computer or server. Choose an
IP address from the router’s LAN subnet, such as 192.168.0.x.
3. Type the MAC address of the computer or server.
Tip: If the computer is already present on your network, copy its MAC
address from the Attached Devices screen and paste it here.
4. Click Apply to enter the reserved address into the table.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v2 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear JWNR2000v2

Netgear JWNR2000v2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info