670508
70
Zoom out
Zoom in
Previous page
1/108
Next page
70 | Chapter 6. Advanced Settings
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
LAN Setup Screen Fields
Device Name. The device name is a user-friendly name for the router. This name is shown in
the Network on Windows Vista and the Network Explorer on all Windows systems. The
Device Name field cannot be blank. The default name is JWNR2000v2.
LAN TCP/IP Setup
IP Address. The LAN IP address of the router.
IP Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the
IP subnet mask allows a device to know which other addresses are local to it, and which
have to be reached through a gateway or router.
RIP Direction. RIP allows a router to exchange routing information with other routers.
The RIP Direction selection controls how the router sends and receives RIP packets. The
default setting is Both.
When set to Both or Out Only, the router broadcasts its routing table periodically.
When set to Both or In Only, the router incorporates the RIP information that it
receives.
When set to None, the router does not send any RIP packets and ignores any RIP
packets received.
RIP Version. This controls the format and the broadcasting method of the RIP packets
that the router sends. It recognizes both formats when receiving. By default, this is set for
RIP-1.
RIP-1. This version is universally supported. It is probably adequate for most
networks, unless you have an unusual network setup.
RIP-2. This version carries more information. Both RIP-2B and RIP-2M send the
routing data in RIP-2 format.
RIP-2B. This version uses subnet broadcasting.
RIP-2M. This version uses multicasting.
Use Router as a DHCP Server. By default, the router functions as a DHCP server, allowing
it to assign IP, DNS server, and default gateway addresses to all computers connected to the
router’s LAN. See Use the Router as a DHCP Server on page 70.
Address Reservation. When you specify a reserved IP address for a computer on the LAN,
that computer always receives the same IP address each time it accesses the router’s DHCP
server. Reserved IP addresses should be assigned to computers or servers that require
permanent IP settings. See Reserved IP Addresses Setup on page 71.
Use the Router as a DHCP Server
By default, the router functions as a DHCP server, allowing it to assign IP, DNS server, and
default gateway addresses to all computers connected to the router’s LAN. The assigned
default gateway address is the LAN address of the router. The router assigns IP addresses to
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v2 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear JWNR2000v2

Netgear JWNR2000v2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info