670508
36
Zoom out
Zoom in
Previous page
1/108
Next page
36 | Chapter 3. Wireless Settings
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
channel at the same time, but also allows 802.11b and 802.11g wireless devices. This
is the default mode.
- Up To 300 Mbps. Performance mode, using channel expansion to achieve the 300
Mbps data rate. The JWNR2000v2 router uses the channel you selected as the
primary channel and expands to the secondary channel (primary channel +4 or –4) to
achieve a 40 MHz frame-by-frame bandwidth. The router detects channel usage and
disables frame-by-frame expansion if the expansion would result in interference with
the data transmission of other access points or clients.
Note: The maximum wireless signal rate is derived from the IEEE
Standard 802.11 specifications. Actual data throughput can vary.
Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Security Options. The selection of wireless security options can significantly affect your
network performance. The time it takes to establish a wireless connection can vary
depending on both your security settings and router placement.
Set Up WPA-PSK and WPA2-PSK Wireless Security
WPA–Pre-Shared Key performs authentication. WPA-PSK uses TKIP (Temporal Key Integrity
Protocol) data encryption, and WPA2-PSK uses AES (Advanced Encryption Standard) data
encryption. Both methods dynamically change the encryption keys making them nearly
impossible to circumvent.
Mixed mode allows clients using either WPA-PSK (TKIP) or WPA2-PSK (AES). This provides
the most reliable security, and is easiest to implement, but it might not be compatible with
older adapters.
Note: To display the security options WPA-PSK and WEP, you have to use
the legacy mode setting of Up to 54 Mpbs.
To set up WPA2 or WPA:
1. Select Setup > Wireless Settings . The Wireless Settings screen displays.
2. Select a radio button for the security option that you want to use. Mixed mode (WPA-PSK
[TKIP] + WP2-PSK [AES]) is the most flexible, since it allows clients using either WPA-PSK
or WPA2-PSK.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v2 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear JWNR2000v2

Netgear JWNR2000v2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info