670508
35
Zoom out
Zoom in
Previous page
1/108
Next page
Chapter 3. Wireless Settings | 35
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Note: The screen sections, settings, and procedures are explained in the
following sections.
3. Set up and test your computers for wireless connectivity:
a. Use your wireless computer or device to join your network. When prompted, enter the
network password.
b. From the wirelessly connected computer, make sure that you can access the
Internet.
Wireless Settings Screen Fields
Region
This field identifies the region where the JWNR2000v2 router can be used. It might not be
legal to operate the wireless features of the router in a region other than one of those
identified in this field. In North America, the region cannot be changed, and is set by
default to US.
Wireless Network
Allow Broadcast of Name (SSID). This setting allows the router to broadcast its SSID so
that a wireless station can display this wireless name (SSID) in its scanned network list.
This check box is selected by default. To turn off the SSID broadcast, clear the Allow
Broadcast of Name (SSID) check box and click Apply.
Wireless Isolation. When this check box is selected, wireless stations cannot
communicate with each other or with stations on the wired network. By default, this check
box is not selected.
Name (SSID). The SSID is also known as the wireless network name. Enter a value of up
to 32 alphanumeric characters. When more than one wireless network is active, different
wireless network names provide a way to separate the traffic. For a wireless device to
participate in a particular wireless network, it must be configured with the SSID for that
network. The JWNR2000v2 default SSID is NETGEAR. You can disable this broadcast
as described in Click Apply to save your settings. on page 38.
Channel. This field determines which operating frequency is used. It should not be
necessary to change the wireless channel unless you notice interference problems with
another nearby wireless network. The router uses channel bonding technology to extend
the bandwidth for data transmission.
Mode. This field determines which data communications protocol is used. You can
choose from:
- Up To 54 Mbps. Legacy mode, for compatibility with the slower 802.11b and 802.11g
wireless devices. WEP and WPA security options are supported at 54 Mbps only.
- Up To 145 Mbps. Neighbor friendly mode, for reduced interference with neighboring
wireless networks. Provides two transmission streams with different data on the same
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear JWNR2000v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear JWNR2000v2 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear JWNR2000v2

Netgear JWNR2000v2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info