710895

Netgear GS748TP Manual

123
Zoom out
Zoom in
Previous page
1/216
Next page
GS700TP Smart Switch Software Administration Manual
4-36 Configuring Switching Settings
v1.0, April 2008
– Enable – Enable STP on the interface.
– Disable – Disable STP on the interface.
• Fast Link – Select the Fast Link state on the interface. If Fast Link mode is enabled for a
interface, the Port State is automatically placed in the Forwarding state when the port link
is up. Fast Link optimizes the STP protocol convergence. The possible field values are:
– Enable – Enable Fast Link on the interface.
– Disable – Disable Fast Link on the interface.
• Port State – Displays the current STP state of a port. If enabled, the port state determines
what forwarding action is taken on traffic. Possible port states are:
– Forwarding – STP is enabled on the port, and the port is forwarding packets based on
the STP topology.
– Disabled – STP is currently disabled on the port. The port forwards traffic while
learning MAC addresses.
– Blocking – The port is currently blocked and cannot forward traffic or learn MAC
addresses.
– Listening – The port is in Listening mode. The port cannot forward traffic nor can it
learn MAC addresses.
– Learning – The port is in Learning mode. The port cannot forward traffic, however it
can learn new MAC addresses.
• Speed – Displays the speed at which the port is operating.
• Path Cost – Enter the method used to assign default path cost to STP ports. The possible
field range is 1 - 200000000. The default path cost assigned to an interface varies
according to the selected CST configuration method (Hello Time, Max Age or Forward
Delay).
• Priority – Select the port priority value. When switches or ports are running STP, each is
assigned a priority. After exchanging BPDUs, the device with the lowest priority value
becomes the Root Port. The port priority has a range of 0-240 in increments of 16. The
default value is 128.
2. Select the STP Status and Fast Link status in the provided fields.
3. Enter the Path Cost in the provided field.
4. Select the Priority from the list in the provided field.
5. Click APPLY to update the device.
… 123 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS748TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS748TP in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info