710799
97
Zoom out
Zoom in
Previous page
1/275
Next page
Configuring Switching Information
97
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
STP Status. Enable or disable the Spanning Tree Protocol administrative mode
associated with the port or port channel.
Fast Link. Specifies if the specified port is an edge port with the CST. Possible values
are Auto, Enable, or Disable. The default is Auto, which specifies that the software
waits for 3 seconds (with no BPDUs received on the interface) before putting the
interface into the PortFast mode.
BPDU Forwarding. Specifies whether spanning tree BPDUs should be forwarded
while spanning-tree is disabled on the switch. Select Enable or Disable.
Port State. The forwarding state of this port. This field is read-only.
Path Cost. Set the Path Cost to a new value for the specified port in the Common
and Internal Spanning Tree. The valid range is 1–200000000.
Priority. The priority for a particular port within the CST. The port priority is set in
multiples of 16. If you specify a value that is not a multiple of 16, the priority is
automatically set to the next lowest priority that is a multiple of 16. For example, if you
set a value from 0 through 15, the priority is set to 0. If you specify a number from 16
through 31, the priority is set to 16.
Port ID. The port identifier for the specified port within the CST. It is made up from the
port priority and the interface number of the port.
Hello Timer. Specifies the switch hello time, which indicates the amount of time in
seconds a port waits between configuration messages. The value is fixed at 2
seconds.
5. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
CST Port Status
To display Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on
the switch, use the CST Port Status screen.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info