710799
95
Zoom out
Zoom in
Previous page
1/275
Next page
Configuring Switching Information
95
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
2. Specify values for CST in the following fields:
Bridge Priority. Specify the bridge priority value for the Common and Internal
Spanning
Tree (CST). When switches or bridges are running STP, each is assigned a
priority. After exchanging BPDUs, the switch with the lowest priority value becomes
the root bridge. The bridge priority is a multiple of 4096. If you specify a priority that is
not a multiple of 4096, the priority is automatically set to the next lowest priority that is
a multiple of 4096. For example, if you set the priority to any value from 0 through
4095, it is set to 0. The valid range is 0–61440. The default priority is 32768.
Bridge Max
Age (Sec). Specify the bridge maximum age time for the Common and
Internal Spanning Tree (CST), which indicates the amount of time in seconds a bridge
waits before implementing a topological change. The value must be less than or
equal to (2 * bridge forward delay) – 1 and greater than or equal to 2 * (bridge hello
time +1). The valid range is 6–40, and the default value is 20.
Bridge Hello T
ime (Sec). Specifies the switch hello time for the Common and
Internal Spanning Tree (CST), which indicates the amount of time in seconds a root
bridge waits between configuration messages. The value is fixed at 2 seconds.
Bridge Forward Delay (Sec). Specify the switch forward delay time, which indicates
the amount of time in seconds a bridge remains in a listening and learning state
before forwarding packets.
The value must be greater or equal to (bridge max age / 2)
+ 1. The valid range is 4–30 seconds. The default value is 15.
Spanning T
ree Maximum Hops. Specify the maximum number of bridge hops the
information for a particular CST instance can travel before being discarded. The valid
range is 1–40.
3. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
The following table describes the MSTP Status information displayed on the CST
Configuration screen:
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info