710799
40
Zoom out
Zoom in
Previous page
1/275
Next page
Configuring System Information
40
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Select the following interface settings for the physical port:
Go To Interface. Enter a port identifier (appears in the Port column) and click the Go
button.
The table entry corresponding to the specified port is selected.
Port. Selects the interface for which data is displayed or configured.
Auto Power Down Mode. Determines whether Auto Power Down mode is enabled
for the port. The factory default is Disable. When the port link is down, the PHY
automatically goes down for a short period and wakes up to check link pulses. This
mode allows automatic negotiation and reduces power consumption when no link
partner is present.
Short Cable Mode. Determines whether Short Cable mode is enabled for the port.
The factory default is Disable. When the port link up at 1 Gbps, the cable length test is
performed. If the length of the cable is less than 10 meters, PHYs are put into
low-power mode so enough power is used to support a short cable. Do not enable
both EEE and Short Cable modes for a port.
EEE Mode. Determines whether Energy Efficient Ethernet (EEE) mode is enabled for
the port. Do not enable both EEE and Short Cable modes for a port.
3. Click APPLY to apply the change to the system.
Configuration changes take effect immediately.
Green Ethernet Detail
Use this screen to display or configure Green Ethernet details per interface.
To configure the Green Ethernet Detail feature:
1. Select System Management Green Ethernet Green Ethernet Detail.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info