710799
39
Zoom out
Zoom in
Previous page
1/275
Next page
Configuring System Information
39
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Enable or disable the Auto Power Down Mode.
Enable. When the port link is down, the PHY automatically goes down for a short
period and then wakes up to check link pulses. This allows the port to continue to
perform autonegotiation while consuming less power when no link partner is present.
Disable. Provide full power to the PHY even if no link partner is present.
3. Enable or disable the Short Cable Mode.
Enable. When the port link is up at 1-Gbps speed, the cable length test is performed.
If the cable length is less than 10 meters, PHYs are put into the low-power mode so
only enough power is used to support a short cable.
Disable. Provide full power to the PHY regardless of cable length.
4. Enable or disable the EEE Mode.
Enable. Enter a low-power mode and disable some functionality for power savings
when the link is lightly loaded.
Disable. Provide full power to the PHY always.
5. Click APPLY to apply the change to the system.
Configuration changes take effect immediately.
Green Ethernet Interface Configuration
Using the Green Ethernet Interface Configuration feature allows for proper port configuration
and the ability to enable or disable the Auto Power Down, Short Cable, and EEE Modes on
specific ports.
To configure the Green Ethernet Interface feature:
1. Select System Management Green Ethernet Green Ethernet Interface
Configuration.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS728TPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS728TPP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS728TPP

Netgear GS728TPP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info