710751
293
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
Configuration Examples B-15
v1.0, April 2010
This example uses the default values for the port authentication settings, but there are several
additional settings that you can configure. For example, the EAPOL Flood Mode field allows
you to enable the forwarding of EAPoL frames when 802.1X is disabled on the device.
6. From the RADIUS Server Configuration screen, configure a RADIUS server with the
following settings:
Server Address: 192.168.10.23
Secret Configured: Yes
Secret: secret123
Active: Primary
For more information, see “RADIUS Configuration” on page 5-3.
7. Click Add.
8. From the Authentication List screen, configure the default List to use RADIUS as the first
authentication method (See
“Authentication List Configuration” on page 5-13).
This example enables 802.1X-based port security on the GS108T or GS110TP switch and prompts
the hosts connected on ports g5-g8 for an 802.1X-based authentication. The switch passes the
authentication information to the configured RADIUS server.
MSTP
Spanning Tree Protocol (STP) runs on bridged networks to help eliminate loops. If a bridge loop
occurs, the network can become flooded with traffic. IEEE 802.1s Multiple Spanning Tree
Protocol (MSTP) supports multiple instances of Spanning Tree to efficiently channel VLAN
traffic over different interfaces. Each instance of the Spanning Tree behaves in the manner
specified in IEEE 802.1w, Rapid Spanning Tree, with slight modifications in the working but not
the end effect (chief among the effects is the rapid transitioning of the port to the Forwarding
state).
The difference between the RSTP and the traditional STP (IEEE 802.1D) is the ability to configure
and recognize full duplex connectivity and ports that are connected to end stations, resulting in
rapid transitioning of the port to the Forwarding state and the suppression of Topology Change
Notification. These features are represented by the parameters pointtopoint and edgeport. MSTP is
compatible to both RSTP and STP. It behaves appropriately to STP and RSTP bridges.
A MSTP bridge can be configured to behave entirely as a RSTP bridge or a STP bridge. So, an
IEEE 802.1s bridge inherently also supports IEEE 802.1w and IEEE 802.1D.
293


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info