710751

Netgear GS108Tv2 Manual

292
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
B-14 Configuration Examples
v1.0, April 2010
802.1X Example Configuration
This example shows how to configure the switch so that 802.1X-based authentication is required
on the ports in a corporate conference room (g5–g8). These ports are available to visitors and need
to be authenticated before granting access to the network. The authentication is handled by an
external RADIUS server. When the visitor is successfully authenticated, traffic is automatically
assigned to the guest VLAN. This example assumes that a VLAN has been configured with a
VLAN ID of 150 and VLAN Name of Guest.
1. From the Port Authentication screen, select ports g5, g6, g7, and g8.
2. From the Port Control menu, select Unauthorized.
The Port Control setting for all other ports where authentication is not needed should
Authorized. When the Port Control setting is Authorized, the port is unconditionally put in a
force-Authorized state and does not require any authentication. When the Port Control setting
is Auto, the authenticator PAE sets the controlled port mode
3. In the Guest VLAN field for ports g5–g8, enter 150 to assign these ports to the guest VLAN.
You can configure additional settings to control access to the network through the ports. See
“Port Security Interface Configuration” on page 5-38 for information about the settings.
4. Click Apply.
5. From the 802.1X Configuration screen, set the Port Based Authentication State and Guest
VLAN Mode to Enable, and then click Apply (See “Port Security Configuration” on
page 5-37).
Figure B-2
Supplicant
Supplicant
Authenticator
Switch
Authentication
Server (RADIUS)
192.168.10.23
… 292 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info