710751
289
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
Configuration Examples B-11
v1.0, April 2010
3. Configure the following settings for Class1:
Protocol Type: UDP
Source IP Address: 192.12.1.0
Source Mask: 255.255.255.0
Source L4 Port: Other, and enter 4567 as the source port value
Destination IP Address: 192.12.2.0
Destination Mask: 255.255.255.0
Destination L4 Port: Other, and enter 4568 as the destination port value
For more information about this screen, see “Class Configuration” on page 4-13.
4. Click Apply.
5. From the Policy Configuration screen, create a new policy with the following settings:
Policy Selector: Policy1
Member Class: Class1
For more information about this screen, see “Policy Configuration” on page 4-17.
6. Click Add to add the new policy.
7. Click the Policy1 hyperlink to view the Policy Class Configuration screen for this policy.
8. Configure the Policy attributes as follows:
Assign Queue: 3
Policy Attribute: Simple Policy
Color Mode: Color Blind
Committed Rate: 1000000 Kbps
Committed Burst Size: 128 KB
Confirm Action: Send
Violate Action: Drop
For more information about this screen, see “Policy Configuration” on page 4-17.
9. From the Service Configuration screen, select the check box next to interfaces g7 and g8 to
attach the policy to these interfaces, and then click Apply (See
“Service Configuration” on
page 4-23).
All UDP packet flows destined to the 192.12.2.0 network with an IP source address from the
192.12.1.0 network that have a Layer 4 Source port of 4567 and Destination port of 4568 from this
switch on ports 7 and 8 are assigned to hardware queue 3.
289


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info