710751
288
Zoom out
Zoom in
Previous page
1/302
Next page
GS108T and GS110TP Smart Switch Software Administration Manual
B-10 Configuration Examples
v1.0, April 2010
Policing: a method of constraining incoming traffic associated with a particular class so that it
conforms to the terms of the TCS. Special treatment can be applied to out-of-profile packets
that are either in excess of the conformance specification or are non-conformant. The DiffServ
feature supports the following types of traffic policing treatments (actions):
drop: the packet is dropped
mark cos: the 802.1p user priority bits are (re)marked and forwarded
mark dscp: the packet DSCP is (re)marked and forwarded
mark prec: the packet IP Precedence is (re)marked and forwarded
send: the packet is forwarded without DiffServ modification
Color Mode Awareness: Policing in the DiffServ feature uses either color blind or color aware
mode. Color blind mode ignores the coloration (marking) of the incoming packet. Color aware
mode takes into consideration the current packet marking when determining the policing
outcome. An auxiliary traffic class is used in conjunction with the policing definition to
specify a value for one of the 802.1p, Secondary 802.1p, IP DSCP, or IP Precedence fields
designating the incoming color value to be used as the conforming color. The color of
exceeding traffic may be optionally specified as well.
Counting: updating octet and packet statistics to keep track of data handling along traffic
paths within DiffServ. In this DiffServ feature, counters are not explicitly configured by the
user, but are designed into the system based on the DiffServ policy being created. See the
Statistics section of this document for more details.
Assigning QoS Queue: directs traffic stream to the specified QoS queue. This allows a traffic
classifier to specify which one of the supported hardware queues are used for handling packets
belonging to the class.
Redirecting: forces classified traffic stream to a specified egress port (physical or LAG). This
can occur in addition to any marking or policing action. It may also be specified along with a
QoS queue assignment.
DiffServ Example Configuration
To create a DiffServ Class/Policy and attach it to a switch interface, follow these steps:
1. From the QoS Class Configuration screen, create a new class with the following settings:
Class Name: Class1
Class Type: All
For more information about this screen, see “Class Configuration” on page 4-13.
2. Click the Class1 hyperlink to view the DiffServ Class Configuration screen for this class.
288


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS108Tv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS108Tv2 in the language / languages: English as an attachment in your email.

The manual is 27,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS108Tv2

Netgear GS108Tv2 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info