646452
106
Zoom out
Zoom in
Previous page
1/154
Next page
97NetBotz Appliance User’s Guide
Proxy
Use the Proxy icon to allow the appliance to use an HTTP, Socks V4, or V5 Proxy Server. When
configured, the appliance uses the proxy server for all e-mail and HTTP Post communications, allowing
these communications to cross the firewall. These settings apply only to communications from the
appliance.
To use an HTTP, Socks V4, or V5 Proxy Server, double-click the Proxy icon to open the Proxy Settings
window. This window contains an HTTP tab and a SOCKS tab, each of which contains the following
fields:
Enter your information and click OK to save your changes.
Rack Access Settings
The Rack Access Settings dialog allows you to set the Auto Lock Timeout and the HID format for the
proximity cards.
Auto Lock Timeout. The Auto Lock Timeout determines how long (in seconds) after a lock is
unlocked that the lock will automatically attempt to lock again. If after the timeout expires the door is
still open, or the handle is up, the lock command will continue to be issued until the proper locking
conditions are fulfilled (handle down and door closed). The auto-locking functionality will attempt to
relock the door after a card, a key, or a remote command is used to unlock the lock.
The Auto Lock setting is also used to limit the amount of time a Level One authorization card has to
authorize a Level Two card swipe. The Auto Lock Timeout setting has a minimum value of 10 seconds
(the default) and a maximum of 60 seconds.
Card Format. The Rack Access System uses HID proximity cards to control access. The HID cards
must be one of the following formats:
H10301 - Standard 26-bit
H10302 - 37-bit without a facility code
H10304 - 37-bit with a facility code
CORP1000 - Corporate 1000
The card format must be determined before any cards are entered into the system. If for some reason the
card format needs to be changed, all registered cards must be removed before the card format can be
changed.
A maximum of 200 cards is supported on NetBotz Rack Monitor 550/570 and Room Monitor 455 using
the Rack Access Pod 170.
Field Description
Hostname The host name or IP address of the proxy server the appliance uses for
e-mail, HTTP Posts, and other outbound communications.
Port The IP port number to connect to on the proxy server.
User name Enter a User name to allow access through the server.
Password/Verify password Enter a Password to allow access through the server.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info