784035
14
Zoom out
Zoom in
Previous page
1/29
Next page
26 27
Installation Powering on
H. Install the Smart Smoke Alarm on the mount by aligning the marks on it with the Smart Smoke Alarm.
I. Turn the Smart Smoke Alarm clockwise in order to lock the assembly.
Once the assembly is locked, the red and the blue LEDs will light up alternatively. After several seconds,
the red LED will flash every 10 seconds to indicate that the Smart Smoke Alarm is working correctly.
EN
Mise sous tension
H. Installez le Détecteur de Fumée Intelligent sur le support en alignant les marques de ce dernier
avec le Détecteur de Fumée Intelligent.
I. Tournez ensuite le Détecteur de Fumée Intelligent dans le sens des aiguilles d’une montre
pour le fixer sur le support.
Une fois fixé, les LEDs rouge et bleue s’allumeront alternativement. Après quelques secondes, la LED rouge
clignotera toutes les 10 secondes pour indiquer le bon fonctionnement du Détecteur de Fumée Intelligent.
FR
DE Einschalten
H. Bauen Sie den Smarten Rauchmelder in die Halterung ein und achten Sie dabei darauf, dass
die Montagemarkierungen der Halterung bündig zum Smarten Rauchmelder ausgerichtet sind.
I. Drehen Sie den Smarten Rauchmelder gegen den Uhrzeigersinn, um ihn zu fixieren.
15 Sekunden lang blickt die rote LED kurz auf. Danach blinkt sie alle 10 Sekunden, was den
korrekten Betrieb des Smarten Rauchmelders anzeigt.
ES Encendido
H. Instala el Detector de Humo Inteligente alineando las marcas presentes en el soporte con
el Detector de Humo Inteligente.
I. Gira el Detector de Humo Inteligente en el sentido de las agujas del reloj para bloquear el montaje.
Una vez que el montaje se ha bloqueado, los leds rojo y azul se pondrán a parpadear. Tras unos
segundos, el led rojo parpadeará cada diez segundos para indicar que el detector de humo está
funcionando correctamente.
IT Messa in funzione
H. Installa il Rilevatore di Fumo Intelligente sul supporto, allineandolo correttamente.
I. Ruotare il Rilevatore di Fumo Intelligente in senso orario per fissarlo al supporto.
Una volta bloccato il gruppo, il LED rosso e il LED blu si accendono alternativamente. Dopo alcuni
secondi, il LED rosso lampeggerà ogni 10 secondi per indicare che il Rilevatore di Fumo Intelligente
funziona correttamente.
NL Inschakelen
H. Om de Slimme Rookmelder op het bevestigingsplaatje te installeren, lijnt u de markeringen
van het bevestigingsplaatje uit de Slimme Rookmelder.
I. Als het gemonteerde apparaat wordt gesloten, zullen de rode en de blauwe led afwisselend
oplichten. Na een paar seconden zal de rode led om de 10 seconden knipperen om aan te geven
dat het Smart Smoke Alarm correct werkt.
IH
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netatmo NSD01 Smoke Alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netatmo NSD01 Smoke Alarm in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info