784035
12
Zoom out
Zoom in
Previous page
1/29
Next page
22 23
Installation Securing the mount
A. Following the previous location recommendations, place the mount in the relevant position,
then mark the two fi xing holes with a pencil.
B. Drill the two holes.
C. Insert one anchor in each of the two holes. Then insert and tighten the two screws,
leaving a 2 mm or 0.08 in gap below the heads.
EN
Installation du support
A. À l’aide des conseils d’emplacement contenus dans les pages précédentes, positionnez le support
à l’endroit adéquat et marquez deux trous à l’aide d’un crayon.
B. Percez les deux trous.
C. Insérez une cheville dans chaque trou, vissez les vis en les laissant dépasser de 2 mm.
FR
A
BC
DE Sichern der Halterung
A. Nachdem Sie die obigen Empfehlungen für den Anbringungsort gelesen haben, setzen Sie die
Halterung an die entsprechende Stelle und markieren Sie die Position der beiden Löcher mit einem
Bleistift.
B. Bohren Sie die beiden Löcher.
C. Stecken Sie einen Dübel in jedes Loch. Setzen Sie dann die Schrauben ein und ziehen Sie sie fest.
Unter den Schraubenköpfen sollten 2 mm Platz sein.
ES Asegurar el soporte
A. Atendiendo a las recomendaciones de ubicación expuestas anteriormente, coloca el soporte
en la posición adecuada, después marca con un lápiz los dos puntos de fi jación.
B. Con el taladro, realiza los dos agujeros.
C. Introduce un taco en cada agujero. A continuación, introduce los dos tornillos y ajústalos dejando
un espacio de 2 mm por debajo de las cabezas de los tornillos.
IT Installazione sicura del supporto
A. Rispettando i consigli sul posizionamento riportati nelle pagine precedenti, posizionare il supporto
nel luogo prescelto e segnare due punti per i fori con la matita.
B. Con il trapano, e ettuare due fori.
C. Inserire un tassello in ognuno dei due fori. Poi inserire e stringere le due viti, lasciando
che sporgano di 2 mm.
NL Het bevestigingsplaatje monteren
A. Volg bovenstaande aanwijzingen voor de plaats van de bevestiging, positioneer het
bevestigingsplaatje op de juiste plaats en markeer de twee bevestigingsgaatjes met een potlood.
B. Boor de twee gaatjes.
C. Plaats een plug in elk gat. Plaats daarna de schroeven en draai ze aan. Laat een ruimte van
2 mm over onder de schroe oppen.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netatmo NSD01 Smoke Alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netatmo NSD01 Smoke Alarm in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info