695255

Nestor Martin HARMONY III MF - 39696 Manual

35
Zoom out
Zoom in
Previous page
1/44
Next page
35
OTHER MAINTENANCE
At the end of each heating season or more often if the use of the stove or the fuel make it
necessary, clean the unit the flue outlet and the chimney.
For cleaning purposes the baffle plates can be removed without any tools, This gives
access to the cleaning flap of the smoke flue and it is even possible to reach the flue outlet.
SUMMER SHUT DOWN
Remove all remaining ash and cinders from the unit, close all the stove doors. If
the room is damp, possibly place some absorbent crystals inside the stove and/or
disconnect it completely from the chimney.
FAULTY OPERATION
This is mainly due to the chimney not drawing adequately. Examine the following points:
The chimney section must be adequate (64 sq. in) and the flue must not be obstructed by
debris or soot.
The flue outlet of the flue connecting pipe is pushed too far into the chimney.
The connection between the unit and the chimney is not airtight or the chimney is permeable
(cracks, etc.).
The chimney is too low compared with surrounding obstacles, i.e., trees, high buildings etc.
This may be the cause of too little drawing or down-draughts.
Note :
For maximum output of the appliance a draught of at least 0.06" water gauge must be
achieved. The flue draught must not exceed 0. 08 " water gauge.
Excess draught should be avoided under all circumstances. If it is found that the chimney only over
draws in windy conditions, cowls such as the Aerocowel (trade name) are very good at controlling
these conditions. If the chimney over draws in normal operation a draught stabiliser must be fitted and
correctly calibrated.
FUME EMISSION
Properly installed and operated this appliance will not emit fumes in your room. Fumes may
occur from de ashing and refuelling. Persistent fume emission must not be tolerated. If this occurs do
not use appliance. Inspect installation for blockage or consult your installing engineer.
ENAMELLED MODELS
The cracking which occurs in the enamel and which in the trade we call crazing cannot qualify as a manufacturing
defect. This cracking is the result of a difference in the coefficient of expansion between the cast iron and the enamel; it has no
detrimental effect on the adhesion of the enamel.
WARNING FOR YOUR SAFETY
Have your stove fitted by a professional.
In the event of problems contact him immediately.
Ask him to obtain originaI NESTOR MARTIN parts for you - beware of imitations.
When you have found the part you require note the part nurnber.
Quote this part number to your retailer who will be able to order it for you from NESTOR
MARTIN Distributors
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nestor Martin HARMONY III MF - 39696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin HARMONY III MF - 39696 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info