16 - English
English
Operation
8. Press and hold the TEMPERATURE key and select a time using
the program knob.
9. Release the TEMPERATURE key.
You have inserted a switching point.
Inserting a switching point at the current time
You can also insert a switching point at the current time:
1. Make sure the display is in normal mode (refer to figure 3-2).
2. Press and hold the INSERT key and change the temperature
using the program knob.The temperature indication is
blinking.
3. Release the INSERT key when the desired temperature is set.
The switching time is set to the current time, rounded off at
10 minutes.
Removing a switching point
1. Make sure the display is in normal mode (refer to figure 3-2).
2. Select the switching point you want to remove with the
program knob.
3. Press and hold the REMOVE key. All digits change into an 8
and disappear from the right to the left.
4. Wait until all digits are removed.
5. Release the REMOVE key.
When you release the REMOVE key before all digits have been
removed, the switching point has not
been removed.
